Table of Contents
Advertisement
Retracting
Remove and insert
Take out and insert the roll-up cover
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
Storage space and interior equipment ›
›
Press the cover in the
handle area.
The cover rolls up.
It is possible that the
cover rolls more slowly
during winter weather
conditions.
›
Press the end of the
crossbar and take out
or insert the cover.
›
Lift the variable load
floor and pull it to-
wards you.
›
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area
.
A
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area on space
.
B
Variable loading floor in the boot
Fasten the raised variable loading floor in the up-
per position
NOTICE
Before closing the boot lid, remove the hook from
the frame.
Remove and insert
›
Lift the variable loading floor up to a distance of
about 15 cm below the luggage compartment cov-
er and then remove it.
›
Insertion takes place in reverse order.
133
›
Press the variable load-
ing floor forward and
hang up.
›
Secure the raised vari-
able loading floor to
the frame of the boot
lid with the hook.
Advertisement
Table of Contents
