96 Starting and driving ›
Or:
›
Hold down the desired point in the map and
choose menu item Start point Define demo mode.
Updating the navigation database
Information on updating the navigation database
must be requested from a ŠKODA partner, or refer
to the following ŠKODA websites.
http://go.skoda.eu/updateportal
▶
Navigation data source Amundsen
The navigation data is stored on an Original SD Card.
In order to ensure the function of the navigation, the
Original SD card, with the navigation data, must be
inserted in the respective slot in the external mod-
ule.
If the original SD card is damaged or lost, a new orig-
inal SD card can be purchased from the ŠKODA
Original Accessories.
With a non-original SD Card, navigation does not
work.
Determining the navigation database version
›
Tap
System information.
Starting with the key
Starting and driving
Starting with the key
Notes on starting
DANGER
Danger of poisoning by exhaust gases!
Do not run the engine in an enclosed space.
▶
Positions of the key in the ignition lock
Starting the vehicle with manual transmission
›
Secure the vehicle with the parking brake.
›
Move the shift lever to the neutral position.
›
Keep the clutch pedal depressed.
›
Turn the key to position
›
Release the key.
Starting the vehicle with automatic transmission
›
Secure the vehicle with the parking brake.
›
Keep the brake pedal depressed.
›
Move the selector lever to position or .
›
Turn the key to position
›
Release the key.
CAUTION
Danger of unexpected vehicle movement!
At temperatures below -10°C, start the vehicle
▶
with the selector lever in the position.
Stopping the engine
›
Secure the vehicle with the parking brake.
›
Turn the key to position
On vehicles with automatic transmission, the key can
only be removed when the selector lever is in the
position.
WARNING
Steering lock hazard!
During a journey with the engine stopped, the igni-
tion must always be switched on.
NOTICE
Risk of engine overheating!
Do not switch the engine off immediately at the
▶
end of your journey after the engine has been run-
ning at high loads. Leave it to run at an idling speed
for about 1 minute.
Ignition off
1
Ignition switched on
2
Start the engine
3
.
3
.
3
.
1