Front turn signal
Before changing the bulb in the right headlight
›
Insert one finger into the recess
latch
on the bracket.
B
›
Remove the bracket.
Replacing the light bulb
Protective cap: Halogen headlights / LED headlights
›
Remove the protective cap from the headlight.
Lighting, windscreen wipers and washers ›
›
Disconnect the washer
fluid reservoir from the
bracket.
and lift the
A
›
Turn and remove the
socket with the bulb.
for the wash water container nozzle .
Low beam and high beam
Before changing the light bulb for the high beam in
the right headlight
›
Insert one finger into the recess
latch
on the bracket.
B
›
Remove the bracket.
Before changing the light bulb for the low beam
light
›
Adjust the front wheels so that the cover cap in
the wheel arch is accessible.
Replace light bulbs
39
›
Change the bulb in the
socket.
›
Insert the socket with
the light bulb into the
headlight and turn it
clockwise
to secure.
›
Fit the protective cap
on the headlight again.
›
After changing the
bulb in the right head-
light, reuse the bracket
›
Disconnect the washer
fluid reservoir from the
bracket.
and lift the
A
›
Insert the bracket from
the tool kit into the re-
cess in the cover cap.
›
Remove the cover by
pulling on the bracket.