Table of Contents
Advertisement
132 Storage space and interior equipment ›
Replace batteries
›
Pry off the cover with a narrow, pointed object in
the area of the arrow.
›
Replace the batteries.
›
Fit the cover and click into place.
NOTICE
New batteries must comply with the specifications
of the original battery.
Rigid boot cover
Remove and insert
The maximum load of the other fastening nets is
1 kg.
Removing
Rigid boot cover
›
Unhook the straps.
›
Hold the raised cover
in place and press the
underside of the cover
on both sides.
›
Remove the cover.
Inserting
Store the cover behind the rear seats
Install in the lowered position
Roll-up luggage compartment cover
Operation
Extending
›
Insert the holder
A
opposite the holder
B
on both sides of the
luggage compartment.
›
Press on the cover
from above until it en-
gages.
›
Hook in the retaining
straps.
›
Insert the cover behind
the rear seats.
›
Insert the holder oppo-
site the bracket on
both sides of the lug-
gage compartment.
›
Press on the front and
rear cover from above
until it snaps into place.
The maximum load of
the cover in the lowered
position is 2.5 kg.
›
Pull out the cover on
the handle until it clicks
into place.
Advertisement
Table of Contents
