Advertisement
Safety and Environmental Notices
Danger Notices
A danger notice calls attention to a situation that is potentially lethal or extremely
hazardous to people.
Use the following danger notices throughout this book:
DANGER
DANGER
DANGER
DANGER
DANGER
Now refer to the System reference code list and follow the instructions in the
SRC table. The list contains all SRC tables for critical resources available at the
time this edition was published. If you cannot find an SRC table, ask your next
level of support for assistance.
This ends the procedure.
Refer to the System reference code list for more information.
To prevent a possible electrical shock during an electrical storm, do not
connect or disconnect cables or station protectors for communications lines,
display stations, printers, or telephones. (RSFTD003)
To prevent a possible electrical shock from touching two surfaces with
different electrical grounds, use one hand, when possible, to connect or
disconnect signal cables. (RSFTD004)
To prevent a possible electrical shock, do not use the port tester during
electrical storms. (RSFTD006)
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the products that attach to the system. It is the
customer's responsibility to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock. (RSFTD201)
To prevent a possible electrical shock when installing the system, ensure that
the power cords for all devices are unplugged before installing signal cables.
(RSFTD202)
3
System Reference Codes
Advertisement
