Advertisement
2749, 2767, 2768, 2842, 2843, 2844, 284B, 284C, 284D, 284E, 286C, 286D, 286E, 286F, 5702
Reference Code
Description/Action Perform all actions before exchanging Failing Items
3120
I/O Processor detected that the bus is not operational
A device was added to SCSI bus 0 of the I/O Adapter and caused the bus
to become not operational. Remove the device.
3121
I/O Processor detected that the bus is not operational
A device was added to SCSI bus 1 of the I/O Adapter and caused the bus
to become not operational. Remove the device.
3122
I/O Processor detected that the bus is not operational
A device was added to SCSI bus 2 of the I/O Adapter and caused the bus
to become not operational. Remove the device.
3123
I/O Processor detected that the bus is not operational
A device was added to SCSI bus 3 of the I/O Adapter and caused the bus
to become not operational. Remove the device.
3136
The removable media device is assigned elsewhere
3140
I/O Processor detected that the bus is now operational
This reference code and the 3120 reference code that occurred before it
require no service action, since SCSI bus 0 is now operational.
3141
I/O Processor detected that the bus is now operational
This reference code and the 3121 reference code that occurred before it
require no service action, since SCSI bus 1 is now operational.
3142
I/O Processor detected that the bus is now operational
This reference code and the 3122 reference code that occurred before it
require no service action, since SCSI bus 2 is now operational.
3143
I/O Processor detected that the bus is now operational
This reference code and the 3123 reference code that occurred before it
require no service action, since SCSI bus 3 is now operational.
3150
I/O processor detected a SCSI bus configuration error
Internal and external SCSI cables are connected to SCSI bus 0 at the same
time. Correct the SCSI bus 0 configuration.
3151
I/O processor detected a SCSI bus configuration error
Internal and external SCSI cables are connected to SCSI bus 1 at the same
time. Correct the SCSI bus 1 configuration.
3200
A tape/CD or disk device reported a failure
3203
Disk media format bad
3205, 3215
Disk sector read error
Disk unit data may need to be reloaded, but the disk unit does not need to
be replaced.
3250
Disk unit requires initialization before use.
Perform a D-IPL and work on errors found in the log.
148
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
SVCDOCS
SVCDOCS
SVCDOCS
SVCDOCS
USER
FI01105
SVCDOCS
SVCDOCS
FI01105
STORIOA
IOP
MEDIA
FI01105
FI01105
USER
Advertisement
