Advertisement
B6xx (including A6xx)
Reference Code
Description/Action Perform all actions before exchanging Failing Items
1604
Not able to create APPN task
An error occurred during task creation which requires a power off of the
system.
Perform LIC-PIP8.
1724
An attempt to create a segment failed
The create could fail for two reasons:
v A code problem
Perform LIC-PIP8.
v No free auxiliary storage on the system
Add additional DASD if the create failed because no auxiliary storage
was available.
1730
An IPL is needed to restore system performance
Licensed Internal Code has detected a condition that is impacting system
performance. System operation can continue, but system performance may
be noticeably reduced until the next IPL.
Look at the Product Activity Log entry, and find the value at offset
x'000180'. If the value equals x'00000122', the error was caused by too
much processor memory being installed.
For more information, contact IBM Service Support.
3000
Logical partition service function Main Storage Dump.
Copy the current main storage dump to media. For more information on
how to copy a Main Storage Dump, refer to the iSeries Service Functions
Information (see "Copying a Main Storage Dump" under "Working with
Storage Dumps").
4401
Missing DASD units.
Copy the current main storage dump to media.
For more information on how to perform a Main Storage Dump, refer to
iSeries Service Functions information (see "Copying a Main Storage Dump"
under "Working with Storage Dumps").
4402
Missing DASD units.
Copy the current main storage dump to media. Then exit the Main Storage
Dump Manager.
For more information on how to perform a Main Storage Dump, refer to
iSeries Service Functions information (see "Copying a Main Storage Dump"
under "Working with Storage Dumps").
4403
Storage Management failed to reach full paging.
Copy the current main storage dump to media.
For more information on how to perform a Main Storage Dump, refer to
iSeries Service Functions information (see "Copying a Main Storage Dump"
under "Working with Storage Dumps").
268
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
AJDG301
AJDG301
GG3PL01
AJDG301
Advertisement
