Download Print this page

IBM iSeries Series Analyze Hardware Problems (System Reference Codes page 67

Hide thumbs Also See for iSeries Series:

Advertisement

Reference Code
Description/Action Perform all actions before exchanging Failing Items
9026
Battery Power Unit is reporting a low charge.
The battery power unit is not charged enough to run a test.
No action required. This reference code is logged for information only.
9027
Battery Power Unit is defective.
No action required. This reference code is logged for information only.
9028
SPCN Licensed Internal Code is not valid.
The Licensed Internal Code in the primary node is not valid. The code will
be reloaded.
No action required. This reference code is logged for error analysis only.
9029
SPCN VPD Damaged
The VPD record in the EEPROM has bad data.
Exchange the failing items for the node reporting the failure.
902C
Battery Power Unit test was aborted.
The battery power unit test was aborted.
No action required. This reference code is logged for information only.
902D
Addressed frame is not in SPCN configuration table.
The addressed frame is not in the SPCN configuration table.
No action required. This reference code is logged for information only.
9031
Frame-to-Frame Communications Failure
The SPCN detected a BCC error on a transmission from another frame. The
transmission is attempted again.
No action required. This reference code is logged for error analysis only.
9032
SPCN Communications Failure, unit to rack.
The frame detected a BCC error on a transmission from a secondary node
to the frame. The transmission is attempted again.
No action required. This reference code is logged for error analysis only.
9033
SPCN Communications Failure, rack to unit.
A secondary node detected a BCC error on a transmission from the frame.
The transmission is attempted again.
No action required. This reference code is logged for error analysis only.
9034
Unsupported Packet Size
The receiving node detected a packet exceeding 70 bytes. The frame can
also return this code if a secondary node returns more than 10 bytes to a
PAS command.
No action required. This reference code is logged for error analysis only.
1xxx
Failing Item
TWRCARD
63
System Reference Codes

Advertisement

loading