Advertisement
B6xx (including A6xx)
Reference Code
Description/Action Perform all actions before exchanging Failing Items
69C8
Abnormal or unexpected HSL OptiConnect disconnection from a remote
system or partition.
The local system or partition disconnected from a remote system or
partition due to an unexpected event or failure. All of the HSL OptiConnect
connections on this loop will be in a failed state. LIC will attempt to
recover from the error. Intervention at the local or remote system or
partition may be required. Possible causes are:
v time out of a critical message
v LIC code / table problem
v Network deadlock detected
The problem may be with:
v The local system or partition
v The remote system or partition
Examine the Service Action Log (SAL) on the local system or partition for
HSL failures on the same HSL loop, or with the Network Interface
Controller at approximately the same time this error occurred.
Examine the remote system or partition for problems. Examine the Service
Action Log (SAL) on the remote system or partition for problems on the
same HSL loop or with the Network Interface Controller at approximately
the same time this error occurred.
Correct any problems you find with the remote and local systems or
partitions that happened at approximately the same time and involve HSL
Opticonnect or HSL loop components or Network Interface Controllers.
If there are no problems with the remote system or partition and there are
no problems with the local system or partition then collect all the Product
Activity Log information for this failure on all systems or partitions. Be
sure to record all words in the SRCs. Contact your next level of support.
69C9
Abnormal or unexpected HSL OptiConnect disconnection from a remote
system or partition.
The local system or partition disconnected from a remote system or
partition due to an failure in a LIC virtualized bus unit. LIC will attempt to
recover from the error. Possible causes are:
v LIC problem where the local bus unit is off line.
v LIC problem where the remote bus unit is off line.
Examine the Service Action Log (SAL) on the local system or partition for
HSL Opticonnect failures that occurred at approximately the same time this
error occurred.
Examine the remote system or partition for problems. Examine the Service
Action Log (SAL) on the remote system or partition for HSL Opticonnect
problems that occurred at approximately the same time this error occurred.
Collect all the Product Activity Log information for this failure on all
systems and partitions on this HSL loop. Be sure to record all words in the
SRCs. Contact your next level of support with the information you have
collected.
292
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
REM_SYS
LOC_SYS
AJDG301
AJDG301
REM_SYS
LOC_SYS
Advertisement
