IBM iSeries Series Analyze Hardware Problems (System Reference Codes page 144

2748, 2757, 2763, 2778, 2782, 5703
(2748, 2757, 2763, 2778, 2782, 5703) Reference Codes
If the error is reported on the control panel, the unit reference code is characters 5
through 8 of the top 16 character line of function 11. If the error is reported on the
console, the unit reference code is the 4 rightmost characters of word 1.
Find the unit reference code in the following table.
For more on the Failing Item column entries, see Table 2. Failing Items Details,
which follows the reference code table below.
Table 1. (2748, 2757, 2763, 2778, 2782, 5703) Reference Codes
Reference Code Description/Action Perform all actions before exchanging Failing Items
3006 System bus error
3020 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 0. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
3021 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 1. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
3022 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 2. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
3023 I/O processor detected a SCSI bus configuration error
Error occurred on SCSI bus 3. To correct or isolate a possible user error or
configuration error, perform SDIOP-PIP17. Use the failing item (FI) codes to
find failing devices.
3100 I/O processor card detected interface error
Error occurred on SCSI bus 0.
Perform SDIOP-PIP13.
3101 I/O processor card detected interface error
Error occurred on SCSI bus 1.
Perform SDIOP-PIP13.
3102 I/O processor card detected interface error
Error occurred on SCSI bus 2.
Perform SDIOP-PIP13.
3103 I/O processor card detected interface error
Error occurred on SCSI bus 3.
Perform SDIOP-PIP13.
140
iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference
Codes)
Failing Item
IOP
ANYBUS
STORIOA
USER
FI01107
STORIOA
USER
FI01107
STORIOA
USER
FI01107
STORIOA
USER
FI01107
STORIOA
FI01107
STORIOA
FI01140
BACKPLN
FI01107
STORIOA
FI01140
BACKPLN
FI01107
STORIOA
FI01140
BACKPLN
FI01107
STORIOA
FI01140
BACKPLN