RADIATOR AND FAN SHROUD
Removal sequence
1 Cushion rubber
2 Front thrust rod bracket
3 Cushion rubber
4 Cushion rubber
5 Thrust rod
Installation sequence
Follow the removal sequence in reverse.
• Refer to the previous section "DISCONNECTION AND CONNECTION OF HOSES AND PIPES" for the correct
insertion depth of radiator hoses into the pump as well as the correct tightening torque of clamps.
14-16
6 Cushion rubber
7 Radiator
(See later section.)
8 Radiator bracket
9 Cushion rubber
10 Radiator support
11 Shroud seal
12 Fan shroud