Fuel Filter Disassembly And Assembly - Mitsubishi 6M70 Workshop Manual

FUEL FILTER
Service standards
Location
3 Overflow valve
Tightening torque (Unit: N·m {kgf·m})
Mark
Eyebolt
Drain plug
Case
Plug
Overflow valve
Cap
Lubricant and/or sealant
Mark
O-ring
13-76
Maintenance item
Parts to be tightened
Points of application
Disassembly sequence
1 Cap
2 Fuel return pipe
3 Overflow valve
4 Fuel feed pipe
5 Eyebolt
6 Fuel feed pipe
7 Plug
8 Drain plug
9 O-ring
10 Case
11 Float
12 O-ring
13 Element
14 Fuel filter head
: Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
WARNING
• Fuel is highly flammable. Keep it
away from flames and sources of
heat.
• Thoroughly wipe up any spilled fu-
el. Otherwise, it may catch fire.
CAUTION
• Be careful not to damage the case.
Standard value
1.14 ± 0.03 MPa
2
{12 ± 0.3 kgf/cm }
Tightening torque
30 {3.0}
2 ± 0.5 {0.2 ± 0.05}
18 to 20 {1.8 to 2.0}
9.8 ± 2.0 {1.0 ± 0.2}
20 to 29 {2.0 to 3.0}
Specified lubricant and/or sealant
Engine oil
Limit Remedy
– Replace
Remarks
–
–
–
–
–
Quantity
As required