Table of Contents
Advertisement
2.11.3 Temperature Monitoring/Display
Temperature
The temperature is measured by means of two temperature detectors. One
Monitoring
detector monitors the processor temperature, the second internal housing
temperature. The temperature is measured via a sensor and its status is
indicated via a green LED for normal temperature and via a red LED for
errors. The following conditions may cause errors:
The temperature status for processor and intern area can be installed
separatly (per Treiber or programm SFC).
An error causes one of the following reactions:
TempLED changes from GREEN to RED
Relay output falls in quiet state
Initiate IRQ
RI 45 PIII, Manual
C79000-G7076-C817-01
Overrange of the acceptance limit of excess temperature
Underflow of the acceptance limit of insufficient temperature
Reaction
Motherboard
Option
always
always
can be set
2-29
Advertisement
Table of Contents
