Table of Contents
Advertisement
SCSI Option
Display Ctrl + A
This setting determines whether the message
Message During
Press <Ctrl> <A> for SCSISelect (TM) Utility!
BIOS Initialization
appears when you power up the system.
Even if you disable display of this message, you can still call SCSI Setup
using the Ctrl + A key combination when starting the system.
Enabled
Disabled
BIOS Support for
This setting enables booting from a bootable CD-ROM
Bootable CD-ROM
Enabled
Disabled
BIOS Support for
This setting determines whether the SCSI BIOS supports a hard disk drive
Int 13 Extensions
with more than 1024 cylinders. Enabled is the default setting.
Enabled
Disabled
7.3.5
SCSI Disk Utilities
If you call the menu item SCSI Disk Utilities, you obtain a list of all devices
connected to the SCSI bus. You also get to select from two menus for hard
disk drives: Verify and Format Disk.
Verify
You can use Verify to verify a selected hard disk drive. All defects thus
identified are entered in the hard disk's existing error list.
Format Disk
You can use Format Disk to format a selected hard disk drive in low-level
format. Hard disks are usually already formatted in low-level format. Use
this menu item only if you want to delete the entire hard disk and create a
new error list.
7-12
The message is displayed when powering up (default setting).
The message is not displayed when powering up.
Booting from a CD-ROM is possible (default setting).
Booting from a CD-ROM is not possible.
Hard disk drives with more than 1024 cylinders are supported
(default setting).
Hard disk drives with more than 1024 cylinders are not sup-
ported.
RI 45 PIII, Manual
C79000-G7076-C817-01
Advertisement
Table of Contents
