Table of Contents
Advertisement
Motherboard
2.12.4
The Power Menu
Overview
This menu has the following structure:
Figure 2-24
In accordance with "green PC" considerations, the following power saving
modes can be set using the power menu:
APM (Advanced
Power
Management)
Power Savings
Standby Timeout [Off]
Suspend
Timeout
2-52
PhoenixBIOS Setup-Utility
Main
Security
Power
Advanced
APM:
[ Enabled ]
[ Disabled ]
Power Savings:
Standby Timeout:
Off
Suspend Timeout:
Off
Hard Disk Timeout:
Disabled
Fan Control:
[ Enabled ]
Resume On Modem Ring:
[ Off ]
Resume On Time:
[ Off ]
[ 00:00:00 ]
Resume Time:
[ Enabled ]
Power Fail Restart:
F1
Help
Select Item
+ / –
ESC
Exit
Select Menu
Enter Select
"Power" Submenu
[Enabled]
[Disabled]
[Disabled]
[Customize, Maximum Power Savings, Maximum Performance]
[1, 2, 4, 6, 8, 12,] ...minutes after your PC goes to standby mode
[16]
[Off]
[5, 10, 15, 20, 30] ...minutes after your PC goes to suspend mode
[40, 60]
In Suspend Mode the CPU is stopped and can only be restarted by
an interrupt: for example keyboard, mouse, Com1/2, Hard Disk.
Version
Boot Sequence
Item Specific Help
Maximum Power Savings conserves
the greatest amount of system power.
Maximum Performance conserves
power but allows greatest system
performance. To alter these settings,
choose Customized. To turn of power
management, choose Disabled.
Disabled
Customized
Maximum Power Savings
Maximum Performance
Change Values
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
Permits the switching off of system resources
not required by the operating system.
APM (advanced power management) access
not permissible for operating system.
No power saving functions
Customized or preset power saving functions
by maximum and minimum amounts.
The settings for Standby/Suspend Timeout,
and Fixed Disk Timeout can be customized
or are set accordingly.
No standby mode
No suspend mode
RI 45 PIII, Manual
C79000-G7076-C817-01
Exit
Advertisement
Table of Contents
