Siemens SIMATIC RI 45 PIII Series Manual page 69

Option "Boot
The following submenu appears when you select the option "Boot Options"
Options"
in the main menu:
Figure 2-14
Quick Boot
Mode
SETUP prompt
POST Errors
Floppy check
Summary screen
By 'enabled' the Feature is free, by 'disabled' inhibited.
RI 45 PIII, Manual
C79000-G7076-C817-01
PhoenixBIOS Setup-Utility
Main Advanced Security
Boot Options
[Enabled]
QuickBoot Mode:
SETUP prompt: [Enabled]
POST Errors: [Enabled]
Floppy check: [Disabled]
Summary screen: [Enabled]
F1 Help Select Item + / -
ESC Exit Select Menu Enter Select
"Boot Options" Submenu
Allows the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
During the system loading phase, the following SETUP prompt is
output at the bottom of the screen: PRESS <F2> to enter Setup.
The loading procedure is aborted if an error is detected during the
system loading phase.
During the system loading phase, the floppy head is moved by a
number of steppings to the inside, and then returned again. This
test is useful because the drive is initialized again in the process.
The most important system parameters are output on the display at
the end of the system loading phase.
Boot Sequence
Power Version
Item Specific Help
Allows the system to skip cer-
tain tests while booting. This
will decrease the time needed
to boot the system.
Change Values F9 Setup Defaults
Sub-Menu F10 Save and Exit
Motherboard
Exit
2-41