Siemens SIMATIC RI 45 PIII Series Manual page 75

Option "PCI
The following submenu appears when you select the option "PCI Devices" in
Devices"
the advanced menu:
Figure 2-20
Option ROM
Scan:
Enable Master:
Latency Timer
RI 45 PIII, Manual
C79000-G7076-C817-01
PhoenixBIOS Setup Utility.
Advanced Security
Main
PCI Devices, Slot #1
Option Rom Scan [Enabled]
Enable Master: [Enabled]
Latency Timer: [0040h]
F1 Help Select Item + / -
ESC Exit Select Menu Enter Select
"PCI Devices, Slot #1" Submenu
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Default]
[0020H
to
00E0H]
Power
Boot Sequence
Version
Item Specific Help
Initialize device
expansion rom
Change Values F9 Setup Defaults
Sub-Menu F10 Save and Exit
The ROM option of the PCI module (if
present) is enabled
The ROM option of a PCI module is disabled.
This slot can assume the PCI master function
This slot can only work as a PCI slave.
The number of active PCI clock cycles of the
master modules are determined by the module.
You can use these settings to set the maximum
number of active PCI clock cycles to the
chosen value.
Motherboard
Exit
2-47