Option "Hardware
The following submenu appears when you select the option "Hardware
Options"
Options" in the main menu:
Figure 2-16
The parameters of the interfaces present on the basic module are set here.
PCI-MPI/DP
On Board
Ethernet
Ethernet Adress
SafeCard func-
tions
Sound
Trackball / PS/2
mouse
RI 45 PIII, Manual
C79000-G7076-C817-01
PhoenixBIOS Setup-Utility
Main
Advanced
Security
Hardware Options
[Enabled]
PCI - MPI / DP:
On Board Ethernet
[Enabled]
Ethernet Adress
0800 0624 xxxx
[Enabled]
Sound
[Enabled]
Safecard functions
Trackball / PS/2 Mouse::
[Auto]
F1
Help
Select Item
+ / -
ESC
Exit
Select Menu
Enter Select
"Hardware Options" Submenu
Entry
Enables the CP5611-compatible MPI/DP interface. The resources
are managed by the BIOS PCI plug & play mechanism.
Enables the On Board Ethernet interface. The resources are mana-
ged by BIOS PCI Plug & Play Mechanism
The individual, specific Ehternet address of your computer. The
areas marked with xxxx are device dependent. If an invalid address
is displayed, (for example: FFFF FFFF FFFF) please notify the
service center for your area.
Enables the On Board SafeCard. The resources are managed by
BIOS PCI Plug & Play Mechanism
Enables or disables the basic module sound chip. The resources are
managed by BIOS PCI Plug & Play Mechanism
Internal
External
Disabled
Auto
Power
Version
Boot Sequence
Item Specific Help
Enable or disable the
PCI - Multi Point Interface
(MPI / DP)
Change Values
F9
Setup Defaults
Sub-Menu
F10
Save and Exit
Function
The PS/2 interface is active.
IRQ 12 is occupied.
The PS/2 interface is active. IRQ 12 is
occupied. The keyboard trackball is disabled.
The PS/2 interface is inactive,
IRQ12 is available.
System recognizes whether a mouse or a key
board with a trackball is connected.
Motherboard
Exit
2-43