Table of Contents
Advertisement
7.2
SCSI Setup
The BIOS of the SCSI controller contains an SCSI Setup program controlled
by menu commands. This program allows you to select settings for the SCSI
controller and SCSI devices connected to it.
When the system starts up, an SCSI BIOS message appears with a list of the
SCSI devices connected.
Note
If an SCSI BIOS error message appears or problems with SCSI devices occur,
read the "Trouble with the SCSI Controller" and "SCSI BIOS Messages"
sections.
7.2.1
Starting SCSI Setup
The first menu of SCSI-Setup, Configure/View Host Adapter Settings and
SCSI Disk Utilities is displayed.
Using Keyboard
Use the following keys to operate the program:
Commands
Note also the status bar at the bottom margin of the screen.
RI 45 PIII, Manual
C79000-G7076-C817-01
Start the device and press the key combination
following message appears on your screen:
Press <Ctrl> <A> for SCSI Select (TM) Utility!
to select an entry
to confirm a selection
to call the previous menu and exit SCSI Setup.
to restore default settings
to toggle between black+white and color display
SCSI Option
and
when the
Ctrl
A
7-5
Advertisement
Table of Contents
