Table of Contents
Advertisement
CD-ROM Drive
4.1
How the CD-ROM Drive Works
The CD-ROM drive is connected to the secondary IDE interface.
Part Names and
Functions
1
Phones Jack
This jack is used to connect a set of headphones. Please use headphones with
a stereo mini-jack plug.
2
Volume Control
This control is used to adjust the headphone volume. This control has no
effect on the left and right audio outputs from the LINE OUT connector on
the back of the unit.
3
BUSY Indicator
This indicator lights while data is being read.
4
Drawer
This drawer prevents dust from getting inside the CD-ROM reader and
should not be left open. If your device is not switched on you can manually
push the tray and close the door of your CD-ROM drive.
5
Emergency
Use a clip or any other device to remove the cartridge from the CD-ROM
Eject Hole
reader if the electrical eject is disabled by software or if power failure occurs
(See "Emergency Eject" for details).
6
Open / Close
This button is pressed to open or close the CD tray when the power of your
Button
device is on.
4-2
1
2
3
4
5
6
RI 45 PIII, Manual
C79000-G7076-C817-01
Advertisement
Table of Contents
