Table of Contents
Advertisement
System Unit
1.3.4
Removing and Installing Fans
Procedure
Proceed as follows to remove or install the fan:
Figure 1-6
1-10
First disconnect the cables and write down their previous connections.
Provided expansion modules are not installed or have previously been
removed, the fan cage can be taken out. First remove the two clamps of the
fan cage (see Figure 1-6) then push the top of the two side sections outward
and lift the fan cage up.
Carefully remove the connecting cables from the bottom of the cut-out, then
remove the two fans.
Proceed in reverse order to install the fans.
Clamps
Removing the Fan Cage
RI 45 PIII, Manual
C79000-G7076-C817-01
Advertisement
Table of Contents
