Table of Contents
Advertisement
1.3.1
Changing the Air Filter (Racksystem)
Important
The rack systems are equipped with an air filter which must be changed
Information
when dirty. Note the following steps while replacing the air filter:
Figure 1-4
Caution
!
When the fans are operating, particles can be drawn into the system unit.
The protective grid may only be removed with the PC switched off.
RI 45 PIII, Manual
C79000-G7076-C817-01
The protective cover has to be locked completely (snapped in place on the
right side).
The fan cover can be lifted off (there is no need to remove the cover of the
system unit); it is simply snapped in place.
The air filter is not attached to anything and can easily be removed.
Fan cover
Operator Elements of the RI
The protective grid prevents the filter from being drawn into the fan, and
should not be removed.
System Unit
Operator panel
Reset key
Lock
1-7
Advertisement
Table of Contents
