Siemens SIMATIC RI 45 PIII Series Manual page 79

Settings
Supervisor
Password is
User
Password is
Set
Supervisor
Password
Set User
Password
Password on
boot
Fixed disk
boot Sector
Diskette
access
RI 45 PIII, Manual
C79000-G7076-C817-01
[Disabled] Password is not active
[Enabled Password is active. Changes the BIOS Setup can only
be made after the password has been entered. A user
password can be entered.
When the password is entered, the field is automatically switched
from [Disabled] to [Enabled] .
[Disabled] Password is not active
[Enabled] Password is active. BIOS-Setup can only be opened
after the password is entered. No changes can be made,
except to the user password.
When the password is entered, the field is automatically switched
from [Disabled] to [Enabled] .
This field opens the " Enter Password" dialog box. After the
supervisor password has been entered, it can be modified, deleted
with the " Return" key and deactivated.
This field opens the " Enter Password" dialog box. After the user
password has been entered, it can be modified, deleted with the "
Return" key and deactivated.
[Disabled] No password required on booting.
[Enabled] Supervisor- oder user-password must be entered on
booting.
Normal All types of access to the hard disk are permitted.
protected No operating system can be installed. This also provi-
des protections against boot viruses.
This protection is only active, if Password on boot " is [enabled].
Supervisor Access to the diskette is only possible if the supervisor
password was entered on booting.
User Access to the diskette is only possible if the user
password was entered on booting.
Motherboard
2-51