Table of Contents
Advertisement
14.5
BIOS setup
14.5
14.5.1
Starting BIOS setup
Starting BIOS setup
Start the setup program as follows:
Reset the device (warm or cold restart).
In the figures shown, the default settings differ based on the device versions. With the
default settings on the SIMATIC Panel PC 577, for example, the following screen appears
after booting:
Phoenix cME FirstBIOS Desktop Pro
Copyright 1985–2004 Phoenix Technologies Ltd.
Copyright 2003-2004 Fujitsu Siemens Computers
Version 5.00 R2.xx.1562.01 (xx depends on version)
Intel® Pentium®4 x.xx GHz (x.xx depends on processor used)
xxxxxxK Extended RAM passed (xx depends on installed memory)
512K Cache SRAM Passed
2. On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
PRESS <F2> to enter SETUP or <F12> to display the boot menu.
3. Press the F2 key as long as the BIOS prompt appears on the screen.
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
Detailed descriptions
14.5 BIOS setup
14-7
Advertisement
Table of Contents
