To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control - Subaru 2008 TRIBECA Owner's Manual

vehicle reaches the desired speed.
3. Push the control lever downward in the
"SET/COAST" direction and release it.
Then release the accelerator pedal.
At this time, the " " indicator light is
illuminated in the combination meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise
control activated. Simply depress the
accelerator pedal to accelerate the vehi-
cle. When the accelerator pedal is re-
leased, the vehicle will return to and
maintain the previous cruising speed.
& To temporarily cancel the
cruise control
There are three ways to cancel the cruise
control temporarily:
Pull the control lever in the "CANCEL"
direction.
Depress the brake pedal.
Shift the selector lever into the "N"
Starting and operating
position.
The " " indicator light in the combination
meter goes off when the cruise control is
canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (32
km/h) or more, push the control lever
upward in the "RES/ACC" direction to
return to the original cruising speed auto-
matically.
The " " indicator light in the combination
meter will automatically come on at this
time.
& To turn off the cruise control
There are two ways to turn off the cruise
control:
Push the main switch again.
Turn the ignition switch to the "Acc" or
"LOCK" position (but only when the
vehicle is completely stopped).
– CONTINUED –
7-31