To Remove The Cover; To Install The Cover Housing - Subaru 2008 TRIBECA Owner's Manual

6-14
Interior equipment
& To remove the cover
1. Rewind the cover.
2. Pull either sleeve on the end of the
cover housing to shorten the cover's
length.
3. Take it off the retainer.
& To install the cover housing
1. Remove the cover at the cover hous-
ing retaining part using a flat-head screw-
driver.
2. Pull either sleeve on the end of the
cover housing to shorten the cover's
length.
3. Insert the projections located on the
both ends of the sleeve into the recesses
of the retainers.