Dome Light - Subaru 2008 TRIBECA Owner's Manual

11-48
Maintenance and service
1. Wrap a flat-head screwdriver in vinyl
tape or cloth, insert it into the gap between
the license plate light assembly and the
rear gate.
2. Carefully pry the light assembly to
remove it.
3. Remove the bulb socket from the
license plate light assembly by turning it
counterclockwise.
4. Pull the bulb out of the socket. Install a
new bulb.
5. Set the bulb socket into the license
plate light assembly and turn it clockwise
until it locks.
6. Reinstall the license plate light assem-
bly to the rear gate.
& Dome light
Vehicles with Rear Seat Entertainment
Vehicles without Rear Seat Entertainment
1. Remove the lens by prying the edge of
the lens with a flat-head screwdriver.