Subaru 2008 TRIBECA Owner's Manual page 186

5-10
Audio
2. Press the "SCAN" button (8) or the
TUNE TRACK button (4) to select the
channel.
3. Press one of the preset buttons (10)
for more than 1.5 seconds to store the
channel. If the button is pressed for less
than 1.5 seconds, the preceding selection
will remain in memory.
NOTE
If the connection between the radio and
battery is broken for any reason such
as vehicle maintenance or radio re-
moval, all channels stored in the preset
buttons are cleared. If this occurs, it is
necessary to reset the preset buttons.
! Display selection
Press the "AUDIO" (5) button while receiv-
ing satellite radio to change the display as
follows:
! Rear seat entertainment
If your vehicle is equipped with a Rear
Seat Entertainment System, you can
enjoy audio outputs from the system
through the vehicle's speakers by press-
ing the "RSE AUX" button (3). Press the
button again to return to the audio set
sound.
NOTE
If your vehicle is equipped with a Rear
Seat Entertainment System, refer to the
separate "Operating Instructions for
Rear Seat Entertainment System" for
further details.