Rear Gate - Subaru 2008 TRIBECA Owner's Manual

2-22
Keys and doors
Rear passengers' window switches
1) Open
2) Close
To close the window, pull the switch up
and hold it until the window reaches the
desired position.
When the lock switch on the power
window switch cluster, located on the
driver's side door, is in the "LOCK"
position, the passengers' windows cannot
be operated with the passengers'
switches.

Rear gate

The rear gate can be locked and unlocked
using either the keyless entry system or
the power door locking switch.
Refer to the "Power door locking switches"
and "Remote keyless entry system" sec-
tions in this chapter.
To open the rear gate, first unlock the rear
gate lock then push the button.
To close the rear gate, lower it slowly and
push down firmly until the latch engages.
The rear gate can be lowered easily if you
pull it down holding the recessed grip.
WARNING
To prevent dangerous exhaust
gas from entering the vehicle,
always keep the rear gate closed
while driving.
Do not attempt to shut the rear
gate while holding the recessed
grip. Also avoid closing the rear
gate by pulling on the recessed
grip from inside the cargo space.
There is a danger of your hand
being caught and injured.