Siemens SINUMERIK 840D sl Function Manual page 70

2 Machine information
2.3 Test series on the machine
Measurement:
Execute the axis test with 100% override and NC automatic, no stop.
Function
Contour
test
Measurem
ent
Fig. 2-43: Measurement series of a test series
2-70
Description
A contour test can be run to check that the
measurement part program is collision-free before
actual measurement.
The contour test can also be carried out with the
function "single block execution" active.
Selection of the "Measurement type" tab. The
measurement can be performed once the notes
have been read and understood.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
© Siemens AG 2006-2013 All Rights Reserved
03/2013
Type
ACTION
ACTION