Siemens SINUMERIK 840D sl Function Manual page 162

3 Setting up functions
3.4 Fault services
Fig. 3-46: Example, PLC variable - cyclic trigger
Function
View
Name
Status
Trigger
Interval
Remainder
[ ]
Delete
Add
Dependent
on start date
3-162
Description
Name of the variable.
Counter status, corrected by
SINUMERIK Integrate, for current absolute
variable content.
Counter status for the next initiation, either
specified by an entry or automatically calculated
and entered by SINUMERIK Integrate upon
interval change.
Interval value
Numeric and graphic display of the remaining
count units (as a percentage) until the next
initiation.
Unit of the counter.
Removes the counter from the server trigger.
Adds another NC variable counter to the server
trigger.
This label specifies the dependency of the start
date for maintenance.
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Type
DISPLAY
INPUT
(max. 100
characters; all
characters are
permissible,
exception <)
DISPLAY
DISPLAY
INPUT
(With
SINUMERIK In
tegrate
update)
DISPLAY
INPUT
(Up to a max.
of 9 digits)
DISPLAY
DISPLAY
ACTION
ACTION
DISPLAY
SELECTION
(Toggle)
© Siemens AG 2006-2013 All Rights Reserved
03/2013