Siemens SINUMERIK 840D sl Function Manual page 216

4 Organizational tasks
4.1 Maintenance
Function
Status
Machine ID
Name
Service
engineer
Responsible
organization
4-216
Description
Indicates the status of the job. The status can be
changed by the user at this point.
Opening the job should indicate that the
maintenance procedures required in the job are
in progress.
Closing the maintenance job corresponds to
acknowledging it. It can be determined here
whether or not the maintenance procedures
were performed successfully.
The status of a maintenance job is "new" when it
is has not yet begun or when it is due.
The job can be opened to perform the
maintenance job.
The job can also be closed right away as OK or
not OK.
The status of a closed job can no longer be
changed.
A job that has been opened can only be closed.
Display of the machine ID from the machine
master data. The displayed value depends on
whether the maintenance job list is visualized
from the point of view of any given partner, or
from the local point of view.
Name of the maintenance schedule which the
user has specified during configuration
The system automatically enters the user who is
logged on to SINUMERIK Integrate, and has
most recently opened the maintenance job on
the machine operator panel.
Indicates the organization configured in the
maintenance schedule as taking responsibility
The user can select a different organization to
be responsible for this particular maintenance
job, from a drop down list box.
See also Section: Editing the master data of a
machine
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Type
SELECTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
SELECTION
INPUT
© Siemens AG 2006-2013 All Rights Reserved
03/2013