Reports - Siemens SINUMERIK 840D sl Function Manual

03/2013
Fig. 5-17: Display of the data points of each selected variable
For information on the operation of the graphic display, see Section: Variable
monitors – time series – measurements and measurement series.

5.1.5 Reports

Function description
Reports are available as an option in SINUMERIK Integrate. These reports provide
an overview of all events on the machines of an organization, within a fixed time
frame of one week. Within an organization, it is possible to group machine master
data by "Manufacturer" or "Location".
A report shows all events compiled by the machines over the course of a week in a
summary report.
Other reports show totaled and extreme values for each machine and event type,
and also use color coding.
Data report (cross-machine summary report)
This report contains individual information for all characteristics that are subject to
limit values, with evaluations grouped and a total displayed with color coding.
•
Axis test, 3 times, per axis test type (yellow / red, number of limit value
violations)
•
PLC variable evaluations (yellow / red; number of limit violations)
•
NC variable evaluations n (yellow / red; number of limit violations)
•
Machine events (number only)
•
Notifications (number only)
A machine is shown on each line of the selection. You can branch to the
corresponding individual machine report via a link. The individual machine report
can also be selected directly via the menu.
© Siemens AG 2006-2012 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
5 Statistics/export
5.1 Multi-machine views
5-249