Siemens SINUMERIK 840D sl Function Manual page 11

03/2013
Condition monitoring services
Measurement and documentation of the current machine status on the basis of
predefined, standardized tests and continuous recording of status characteristics
(traverse path, traverse time and traverse operations for one axis). The test
parameters can be defined centrally and configured with appropriate warning limits.
Using series of measurements, it is also possible to identify trends and apply them
as a basis for optimizing maintenance and service activities.
The machine operator can then carry out these predefined tests quickly and easily,
and without additional test equipment.
The following tests and monitors are available:
•
Circularity test
•
Equability test
•
Universal axis test
•
Variable monitor (NC variables, PLC variable,s freely addressable variables)
Data services
The data services permit the current control archives (NC and PLC archives) on
the server to be saved, to be restored in the control in a controlled way, and to be
used as reference for control monitors comparisons.
Workflow services
Triggering of service and maintenance processes by notification via media that are
internal and external to the system (SMS, e-mail, service cases). Planning,
monitoring, and documentation of maintenance activities on the machine.
Maintenance schedules support you in the following tasks:
•
Load- and consumption-based predictive maintenance (see Section: Creating
maintenance schedules and organizational tasks)
•
Automated triggering of operating sequences when faults are detected (see:
Maintenance schedules, maintenance jobs, fault help requests, and service
cases)
•
Planning time schedule and contents of condition monitors, and monitoring
their execution (see: Maintenance schedules, maintenance jobs and control
monitors)
The Workflow Services can respond to all event sources of the Control Monitor
Services and Condition Monitoring Services.
Administration services
Functions for the administration of the system:
•
Creation and administration of machines
•
Creation and administration of users
•
Assignment of access rights for external organizations
•
Access to use data / invoices
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
1 Introduction
1.2 Overview of functions
1-11