2.4.9
Tool parameter 24: Clearance angle
Certain turning cycles, in which traversing motions with relief cuts are generated, monitor the
clearance angle of the active tool for possible contour violation.
α
①
②
The clearance angle is entered in tool parameter 24.
Value range: 0° ... 90° (without sign)
Note
If a clearance angle of zero is entered in tool parameter 24, then relief cuts are not monitored
in the turning cycles.
Tools
Function Manual, 06/2019, A5E47435126B AA
Clearance angle
The contour to be machined is not violated.
The contour to be machined would be violated.
W1: Tool offset
2.4 Tool parameters
49