Corners In Circumferential Milling - Siemens SINUMERIK 840D sl Function Manual

W5: 3D tool radius compensation
3.1 Function
3.1.2.1

Corners in circumferential milling

Inside and outside corners are handled separately. The terms inside corner and outside corner
are dependent on the tool orientation.
①
②
When the orientation changes at a corner, for example, the corner type may change while
machining is in progress:
Whenever this occurs, the machining operation is aborted with alarm 10770.
240
Inside corner
Outside corner
Function Manual, 06/2019, A5E47435126B AA
Tools