W1: Tool offset
2.8 Tool carriers with orientation capability
The following settings are obtained at the mill head shown for a machine with toolholder with
orientation capability of kinematic type T:
Component of the offset vector l
Component of the offset vector l
Component of the offset vector l
Component of rotary axis v
Component of rotary axis v
Tool base dimension of tool reference point
Note
The tool reference point for the tool base dimension is defined by the reference point at the
machine.
For further information regarding the reference points in the working area, see Function Manual
"Basic Functions", Section "Axes, coordinate systems, frames".
Figure 2-33
108
=
1
=
2
=
3
=
1
=
2
Assignment of the toolholder data
(-200, 0, 0)
(0, 0, 0)
(-100, 0, 0)
(1, 0, 0)
(-1, 0, 1)
(0, 0, 250)
Function Manual, 06/2019, A5E47435126B AA
Tools