Replacement Of The Accelerator And Adjustment Of The Carburetor - Stiga T 102 Series Workshop Manual

WORKSHOP MANUAL
T...102/122 - TC...102/122
Validity
General informations
­­­
Related topics
[ 5.4] Removal of the dashboard
[ 5.4a] Removal of the dashboard
Map of functional units
REPLACEMENT OF THE ACCELERATOR AND
ADJUSTMENT OF THE CARBURETTOR
Remove the dashboard.
Take off the knob (1) and disconnect the cable (2)
from the connection terminal (3) on the engine.
4
Undo the two fixing screws (4) and take out the ac ce-
lerator together with the wire.
On reassembling, put the accelerator lever in the
«MI NIMUM» position, connect the end of the cable
(2) to the terminal (3) on the engine after having mo-
ved the cursor (5) in the same «MINIMUM» position
specific to each type of engine and shown in the in-
struc tion booklet.
5 3
CHAPTER
6.9
When assembly is completed ...
Refit the dashboard.
1
2
REVISION FROM ... PAGE
0 2018 1 of 1