Functional Units Map; Symbols; Terminology And Abbreviations - Stiga T 102 Series Workshop Manual

WORKSHOP MANUAL
T...102/122 - TC...102/122
7. Electrical system
This chapter deals with the problems and checks
con nect ed with the electrical system.
All work can be done using a tester without ha ving
to use special equipment.
The electrical diagrams can be useful to you for
understanding how the system functions and to fa­
cilitate the pinpointing of any problems.
8. Technical specifications
This chapter summarises all the main information
re garding the machine.

FUNCTIONAL UNITS MAP

The map is a search tool that provides instant access
to all information concerning machine operational unit
or element.
ENGINE - FUEL TANK TRANSMISSION - BRAKE - WHEELS
CUTTING DECK
BODY ELECTRICAL SYSTEM
HOW TO USE THE MANUAL
Identification is simplified by the use of icons resem-
bling the various units, each of which is linked to a ta-
ble of contents that lists all related topics.
In the manual some symbols are present. They are
used to draw the attention of the operator, reminding
him to perform the interventions with the necessary
attention and caution.
Indicates operations that should be carried out
with utmost care to avoid impairing the function-
ality and safety of the machine.
Indicates operations that should be carried out
with utmost care to avoid injury to operators.
Highlights all those operations that require differ-
ent working methods depending on the type of
machine, subsequent modifications and the ac-
cessories fitted.
Indicates cross-reference to other parts of the
manual, followed by the number of the relevant
chapter, paragraph or sub-paragraph.
STEERING

SYMBOLS

CHAPTER REVISION FROM ...
i 1 2018

TERMINOLOGY AND ABBREVIATIONS

Some paragraphs are preceded by a definition that
highlights their importance:
NOTE General reference for the correct maintenance
execution and methods..
IMPORTANT Specific procedures or information
necessary to avoid damage to the machine or equip­
ment.
WARNING! Non-observance will result in the
risk of injury to oneself or others.
DANGER! Non-observance will result in the risk
of serious injury or death to oneself or others.
Whenever reference is made
to a position on the machine
"front", "back", "left" or "right"
side, this refers to the posi-
tions of the seated operator.
The following abbreviations are used in this manual
Dx / Sx = Right / LeftV
Min / Max = Minimum / Maximum
Chap. = Chapter
PTO = Power Take Off
HST = Hydrostatic Transmission
PAGE
2 of 2