Removal Of The Collector Channel - Stiga T 102 Series Workshop Manual

WORKSHOP MANUAL
T...102/122 - TC...102/122
Validity
General informations
Removing the collector channel gives access to:
– the small side wheels of the drive belt;
– the traction engagement control rod
Removal of the collector channel is indispensa­
ble for dismantling the cutting deck and if the rear
pla te is to be removed.
Related topics
---
Map of functional units

REMOVAL OF THE COLLECTOR CHANNEL

The conveyor (1) is connected to the rear plate (2) by
two plastic clamps (3), removable with the help of a
screwdriver.
2
3
On assembly, ensure the free vibration of the convey-
or at each cutting deck height variation.
CHAPTER
5.3
1 3
REVISION FROM ... PAGE
0 2018 1 of 1