Removal/Installation Of Covers; Removal Of Engine Covers - Stiga Titan Series Workshop Manual

2.2 Removal/Installation of
covers

2.2.1 Removal of engine covers

• Remove the front and rear rubber
straps A (4x) on the side covers.
• Remove the rear engine cover by
unscrewing the five screws B (3x), C
(2x) behind the side covers.
• Remove the upper cover by unscrew-
ing the screws D (4x) (and B (3x),
same screws as the rear engine
cover).
• Remove the front cover by releasing
the locking knobs E (2x).
Installation is in reverse order, remember
that the two locking knobs are adjustable.
WORKSHOP MANUAL
TITAN
Chapter
2 - Chassis and bodywork
E
A
D
A
C
EDITION
2018
A
B
D
Page
21
A
C