11.4. Maintenance Log
Display the recorded maintenance log.
11.4.1. Maintenance Log screen
The predictive maintenance function stores 10 maintenance log items of the past.
Upon executing maintenance reset, item, date & time, consumption degree [%] and accumulation count
are recorded.
On the Maintenance Log screen, the recorded log is displayed.
Log targets: Grease, timing belt, reduction gear, bearing, ball screw, overhaul
Maintenance Log
1) Select Parts
Select items for which a log is displayed.
(All, Grease, Timing Belt, Gear, Bearing, Ball Screw, Overhaul)
2) Component
Items selected in the Select Parts field are displayed. A maximum of 10 log items are displayed
for each axis.
3) Axis Number
Displays the target axes. Displays "-" for overhaul.
4) Date
Displays the reset date & time.
5) Consumption degree
Displays consumption degree [%] at the time of reset.
(2) Component
(1) Select Parts
(4) Date
(3) Axis
Number
(5) Consumption
degree
Maintenance 87