11.3.1. Backup (robot personal computer)
Save the predictive maintenance information in the robot controller to a file on a personal computer.
When clicking the [Backup] button, a time stamp folder (folder name: "YYmmdd-HHMMSS") is
automatically created in the [Maintenance] - [PMBackup] folder directly under the project and the backup
data is saved in that folder.
The following describes how to back up predictive maintenance information.
1
Create a backup file for predictive maintenance information.
1) Start predictive maintenance.
2) Click [Maintenance] - [Backup].
3) When you click Backup on the main screen, the "Select Backup Folder" screen opens, and
click the "OK" button.
Storage destination and the folder name of the backup data
Storage destination:[Folder for workspace]¥[Project name]¥Maintenance¥PMLog
Folder name:[YYYYMMDD-HHMMSS]
(The storage destination and the folder name can be changed.)
4) After a while, a message indicating the end of data read is displayed.
Backup
Reading of data completed
Backup
Maintenance 85