Pad Settings (Pad Menu); Changing The Pad's Sound (Instrument) (Inst Select); Editing An Instrument; (Inst Edit) - Roland Groovebox MC-707 Reference Manual

Editing the DRUM Track
Pad Settings
(PAD MENU)
Here you can assign an instrument to each pad.
In PAD MENU you can change the instrument, and load or edit samples.
1 .
Hold down the [SHIFT] button
button .
The KIT EDIT screen appears.
2 .
Use the cursor buttons to select the pad that you want to
edit, and then press the
The DRUM INST MENU screen appears.
Changing the Pad's Sound (Instrument)
(INST SELECT)
1 .
Use the cursor buttons to select "INST SELECT," and then
press the [ENTER] button .
The DRUM INSTRUMENT browser appears.
In the DRUM INSTRUMENT browser, instruments or sample files can
be loaded into a kit.
5
PRESET: Load an instrument or kit from the MC-707's presets
5
PROJECT:
Load an instrument from a project saved on the SD card
5
WAVE FILE:
Load a sample file from the SD card
46
and press the [SOUND]
[ENTER] button .

Editing an Instrument

Here's how to edit the instrument that's loaded into the pad.
1 .
Use the cursor buttons to select
the [ENTER] button .
The DRUM INST SETTING screen appears.
Select the category of parameter that you want to edit.
Use the cursor buttons or the [C1] [C2] knobs to switch categories.
Use the cursor buttons or the [C3] knob to select the parameter that
you want to edit, and use the [C4] knob to edit the value.
& "Parameter List" (p. 61)
* If sample is selected as the WAVE GROUP TYPE, you can move the cursor to
Wave Number and press the [ENTER] button to edit the waveform.
Editing a Sample
(SAMPLE EDIT)
Here's how to edit the user sample that's loaded.
1 .
Use the cursor buttons to select
press the [ENTER] button .
The SAMPLE EDIT screen appears.
Parameter Value
START 0–8388607
LOOP 0–8388607
END 0–8388607
ZOOM x65536–x1
FWD, ONE-SHOT,
MODE
REV, REV-ONE
LEVEL 0–127
-50.0 cent–50.0
TUNE
cent
gain 0db, +6db, +12db
Original Key C-1–G9
* The waveform specified as the instrument's WMT1 is edited.
* If you want to edit the WMT2–3 waveform, move the cursor to WAVE NUMBER
in the INST EDIT screen, and press the [ENTER] button.

(INST EDIT)

"INST EDIT," and then press
"SAMPLE EDIT," and then
Explanation
Specifies the position at which playback
starts.
Specifies the loop position.
Specifies the position at which playback
ends.
Zooms the waveform display in or out.
Specifies the playback method.
Adjusts the volume.
Finely adjusts the pitch.
Specifies the sample's approximate volume.
Registers the sample's pitch.