Transient; Mid-Side Eq - Roland Groovebox MC-707 Reference Manual

76 Transient

This effect lets you control the way in which the sound attacks and
decays.
L in
Envelope Envelope
Controller Controller
R in
Parameter Value
Attack -50–+50
Release -50–+50
Output Gain -24–+12 [dB]
Sense LOW, MID, HIGH
Level 0–127

77 Mid-Side EQ

This effect allows the left/right signals that have similar phase to be
tonally adjusted in a different way than the left/right signals that have
different phase.
Mid
L in
LR LR
/ /
MS MS
R in
Side
Parameter Value
M EQ Switch OFF, ON
M Input Gain -12.00–+12.00 [dB]
20, 25, 31, 40, 50, 63, 80,
M Low Frequency 100, 125, 160, 200, 250,
315, 400 [Hz]
M Low Gain -12.00–+12.00 [dB]
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
M Mid1 Frequency 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
M Mid1 Gain -12.00–+12.00 [dB]
M Mid1 Q 0.5, 1.0, 2.0, 4.0, 8.0
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
M Mid2 Frequency 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
M Mid2 Gain -12.00–+12.00 [dB]
M Mid2 Q 0.5, 1.0, 2.0, 4.0, 8.0
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
M Mid3 Frequency 1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000
[Hz]
M Mid3 Gain -12.00–+12.00 [dB]
M Mid3 Q 0.5, 1.0, 2.0, 4.0, 8.0
L out
R out
Explanation
Character of the attack.
Higher values make the attack more
aggressive; lower values make the attack
milder.
Character of the decay.
Higher values make the sound linger; lower
values make the sound cutoff quickly.
Output gain
Quickness with which the attack is detected
Output Level
5-Band EQ 5-Band EQ
MS MS
/ /
LR LR
5-Band EQ 5-Band EQ
Explanation
Switches whether to apply tonal adjustment
to left/right input signals whose phase is
similar (in phase).
Volume of left/right input signals whose
phase is similar (in phase)
Frequency of the low range
Gain of the low range
Frequency of the middle range 1
Gain of the middle range 1
Width of the middle range 1
Set a higher value to narrow the range to be
affected.
Frequency of the middle range 2
Gain of the middle range 2
Width of the middle range 2
Set a higher value to narrow the range to be
affected.
Frequency of the middle range 3
Gain of the middle range 3
Width of the middle range 3
Set a higher value to narrow the range to be
affected.
Parameter
M High Frequency
M High Gain
S EQ Switch
S Input Gain
S Low Frequency
S Low Gain
S Mid1 Frequency
S Mid1 Gain
S Mid1 Q
S Mid2 Frequency
S Mid2 Gain
S Mid2 Q
S Mid3 Frequency
L out
R out
S Mid3 Gain
S Mid3 Q
S High Frequency
S High Gain
Level
Value Explanation
2000, 2500, 3150, 4000,
5000, 6300, 8000, 10000, Frequency of the high range
12500, 16000 [Hz]
-12.00–+12.00 [dB] Gain of the high range
Switches whether to apply tonal adjustment
OFF, ON to left/right input signals whose phase is
distant (opposite phase).
Volume of left/right signals whose phase is
-12.00–+12.00 [dB]
distant (opposite phase)
20, 25, 31, 40, 50, 63, 80,
100, 125, 160, 200, 250, Frequency of the low range
315, 400 [Hz]
-12.00–+12.00 [dB] Gain of the low range
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150, Frequency of the middle range 1
4000, 5000, 6300, 8000
[Hz]
-12.00–+12.00 [dB] Gain of the middle range 1
Width of the middle range 1
0.5, 1.0, 2.0, 4.0, 8.0
Set a higher value to narrow the range to be
affected.
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150, Frequency of the middle range 2
4000, 5000, 6300, 8000
[Hz]
-12.00–+12.00 [dB] Gain of the middle range 2
Width of the middle range 2
0.5, 1.0, 2.0, 4.0, 8.0
Set a higher value to narrow the range to be
affected.
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150, Frequency of the middle range 3
4000, 5000, 6300, 8000
[Hz]
-12.00–+12.00 [dB] Gain of the middle range 3
Width of the middle range 3
0.5, 1.0, 2.0, 4.0, 8.0
Set a higher value to narrow the range to be
affected.
2000, 2500, 3150, 4000,
5000, 6300, 8000, 10000, Frequency of the high range
12500, 16000 [Hz]
-12.00–+12.00 [dB] Gain of the high range
0–127 Output Level
MFX/IFX Parameters
115