Mfx Editing; Editing The Sample Name - Roland Groovebox MC-707 Reference Manual

Parameter Value
END POINT, ORG
STRETCH
BPM
ORG BPM 20.00–250.00

MFX Editing

Use the [C2] knob to select the effect type, and press
the [C2] knob to turn the effect on/off.
To turn the effect on, add a "(" symbol to the check
box located beside the effect name.
Use the cursor buttons or the [C3] knob to select the parameter that
you want to edit, and use the [C4] knob to edit the value.
& "MFX/IFX Parameters" (p. 84)
Parameter Value/Explanation
Turns MFX on/off, and selects the type of MFX that is used.
To turn MFX on, add a "(" symbol to the check box located
MFX Type
beside the effect name.
& "MFX/IFX Parameters" (p. 84)
Edit the parameters of the selected MFX.
MFX parameters
& "MFX/IFX Parameters" (p. 84)
Level 0–127
Dly Send 0–127
Rev Send 0–127
Explanation
Specifies how to set the tempo that is the
reference for time stretch.
END POINT: The tempo (BPM) is
automatically specified according to the
END POINT, START POINT, MEASURE, and
SCALE.
ORG BPM: The tempo (BPM) is specified
manually. The upper right of the screen
"BPM: value . "
indicates
If BPM is 512 or higher, time stretch will
not occur correctly.
If STRETCH is set to ORG BPM, this specifies
the BPM of the sample before it was
stretched.
Specifies the MFX output volume.
Specifies the MFX depth when
applying MFX, or specifies the volume
of the original sound when not
applying MFX.
Specifies the level of the signal sent to
delay.
Specifies the level of the signal sent to
reverb.

Editing the Sample Name

The LOOPER NAME screen appears, allowing you to edit the sample
name.
1 .
Use the cursor buttons to select
then press the [ENTER] button .
The LOOPER NAME screen appears.
Operating the Unit
Cursor [<] [>] buttons
[C2] knob
[C3] knob [C4] knob,
[VALUE] knob
Press the [C2] knob
Press the [C3] knob
* The edited name is shown in the content browser.
LOOPER Track
"LOOPER NAME EDIT,"
Explanation
Selects the character to edit.
Switches between uppercase, lowercase,
numerals, and symbols.
Change the character.
Inserts a space.
Deletes a character.
and
49