Inst Penv - Roland Groovebox MC-707 Reference Manual

Parameter Value
Wave delay
This produces a time delay between the moment a key is pressed (or
released), and the moment the Wave actually begins to sound. You
can also make settings that shift the timing at which each Wave is
sounded.
Wave Delay Mode
This differs from the Delay in the internal effects, in that by changing
the sound qualities of the delayed Wave and changing the pitch
for each Wave, you can also perform arpeggio-like passages just by
pressing one key.
You can also synchronize the Wave delay time to the tempo of the
external MIDI sequencer.
NORMAL
HOLD
Wave Delay Mode
KEY-OFF-NORMAL
KEY-OFF-DECAY
Wave Delay Time
OFF, ON
Sync
Wave Delay Time 1/64T–2
(note)
Wave Delay Time 0–1023
Explanation
The Wave begins to play after the time
specified in the Wave Delay Time parameter
has elapsed.
No Partial Delay
Delay time
Note on Note o
Although the Wave begins to play after
the time specified in the Wave Delay Time
parameter has elapsed, if the key is released
before the time specified in the Wave Delay
Time parameter has elapsed, the Wave is not
played.
No sound
Delay time
played
Note on Note o
Rather than being played while the key is
pressed, the Wave begins to play once the
period of time specified in the Wave Delay
Time parameter has elapsed after release of
the key.
This is effective in situations such as when
simulating noises from guitars and other
instruments.
Delay time
Note on Note o
Rather than being played while the key is
pressed, the Wave begins to play once the
period of time specified in the Wave Delay
Time parameter has elapsed after release of
the key. Here, however, changes in the TVA
Envelope begin while the key is pressed,
which in many cases means that only the
sound from the release portion of the
envelope is heard.
Delay time
Note on Note o
Set this ON if you want the Wave delay time
to synchronize with the tempo.
This is available when Wave Delay Time Sync
is ON. It specifies the delay time in terms of a
note value.
This is available when Wave Delay Time Sync
is OFF. It specifies the delay time without
regard to the tempo.
Level
Fade Lower
Range Lower
Parameter Value
Velocity Range Low 1–127
Velocity Range Up 1–127
Velocity Fade Low 0–127
Velocity Fade Up 0–127

INST PENV

Parameter Value
Env Depth -100–+100
Env Velocity Sens -100–+100
Env Time 1 Velocity
-100–+100
Sens
Env Time 4 Velocity
-100–+100
Sens
Env Time 1–4 0–1023
Env Level 0–4 -511–+511
Parameter List
Velocity
Fade Upper
Range Upper
Explanation
Specifies the lower limit (Lower) and upper
limit (Upper) of the velocities that will sound
the Wave.
Make these settings when you want to play
different Waves depending on your keyboard
dynamics.
Specifies the degree to which the Wave is
sounded by notes played more softly than
Velocity Range Low. If you don't want the
tone to sound at all, set this parameter to "0. "
Specifies the degree to which the Wave is
sounded by notes played more strongly than
Velocity Range Up. If you don't want the tone
to sound at all, set this parameter to "0. "
Explanation
Adjusts the effect of the Pitch Envelope.
Higher settings will cause the pitch envelope
to produce greater change. Negative (-) value
will invert the shape of the envelope.
Keyboard playing dynamics can be used to
control the depth of the pitch envelope. If
you want the pitch envelope to have more
effect for strongly played notes, set this
parameter to a positive (+) value. If you want
the pitch envelope to have less effect for
strongly played notes, set this to a negative (-)
value.
This allows keyboard dynamics to affect the
Time 1 of the Pitch envelope.
If you want Time 1 to be speeded up for
strongly played notes, set this parameter to a
positive "+" value. If you want it to be slowed
down, set this to a negative "-" value.
Use this parameter when you want key
release speed to affect the Time 4 value of the
pitch envelope.
If you want Time 4 to be speeded up for
quickly released notes, set this parameter to a
positive (+) value. If you want it to be slowed
down, set this to a negative (-) value.
Specify the pitch envelope times (Time 1–
Time 4).
Higher settings will result in a longer time
until the next pitch is reached. (For example,
Time 2 is the time over which the pitch
changes from Level 1 to Level 2.)
T1 T2 T3 T4
Pitch
L0
L1 L3
Note on Note o
L2 L4
T：Time L：Level
Specify the pitch envelope levels (Level 0–
Level 4).
It determines how much the pitch changes
from the reference pitch (the value set with
Coarse Tune or Fine Tune on the Pitch screen)
at each point.
Positive (+) value will cause the pitch to be
higher than the standard pitch, and negative
(-) value will cause it to be lower.
Time
77