Roland Groovebox MC-707 Reference Manual page 35

Deleting Motion from a step
1 .
While holding down the
The EDIT STEP screen appears.
2 .
Press the cursor [<] button
3 .
Use the MEASURE [<] [>] buttons
select the step from which you want to delete Motion .
4 .
While holding down the
knobs .
The Motion is deleted.
N OT E
If the [REC] button is lit, pressing the [CLEAR] button deletes the notes.
ME M O
You can also delete by turning the [C1]–[C3] knobs all the way to the left.
5 .
When you have finished editing, press the
return to the home screen .
Inputting smooth Motion
(MOTION DESIGNER)
By using MOTION DESIGNER, you can input Motion data that changes
smoothly in time.
This function is a convenient way to create effects such as ducking
(side-chain).
1 .
Select the Motion that you want to edit .
&
"Switching the Motion that's edited or viewed by the step
buttons" (p. 34)
2 .
In the EDIT STEP screen, press the
The screen indicates "UTILITY: MOTION DESIGNER . "
3 .
Use the [C1]–[C4] knobs
want to input .
Controller Parameter
[C1] knob FORM TYPE
[C2] knob STEP LENGTH
[C3] knob MIN VALUE
[C4] knob MAX VALUE
4 .
Press the [ENTER] button .
Time-varying values are written as Motion for the specified knob.
5 .
When you are finished editing, press the
return to the home screen .
[SHIFT] button, press a step button .
to select the "MOTION" tab .
and the step buttons to
[CLEAR] button, press the [C1]–[C3]
[EXIT] button
[FUNC] button .
to adjust the parameters that you
Explanation
Selects the waveform of the time-
varying change.
Specifies the number of steps from
beginning to end.
Specifies the minimum value of the
waveform.
Specifies the maximum value of the
waveform.
[EXIT] button
to
to
Recording Knob Movement in Steps (MOTION)
35