Editing The Drum Track; Simple Sound Editing - Roland Groovebox MC-707 Reference Manual

Editing the DRUM Track

A drum track is a track that provides PCM synthesis and sample
playback functionality.

Simple Sound Editing

1 .
In the home screen, use the cursor buttons to select the
drum track that you want to edit .
* If the sound source is Clip, select the clip that you want to edit.
2 .
Hold down the [SHIFT] button
button .
The KIT EDIT screen appears.
A
3 .
Use the cursor buttons to select an icon .
4 .
Use the [C1]–[C4] knobs
You can also select an icon and press the [ENTER] button to edit.
ME M O
Press the [FUNC] button to access the second page.
A PAD
You can use the [C1]–[C4] knobs to perform simple editing for the
selected pad.
Press the [ENTER] button to open the edit menu.
Parameter Value
LEVEL 0–127
COARSE -24–+24
RELEASE 0–1023
REVERB 0–127
FINE -50cen–+50cen
PAN L64–63R
ENV MODE NO-SUS, SUSTAIN
DELAY 0–127
With a pad selected, press the [ENTER] button to access the pad
edit menu. Here you can exchange or edit sounds.
You can use the [C1]–[C4] knobs to perform simple editing of the
sound.
and press the [SOUND]
B D
C E
to edit .
Explanation
Adjusts the volume.
Adjusts the pitch in semitone units.
Specifies the time over which the sound
disappears after the key is released.
Larger values produce a longer decay, and
shorter values produce a crisper sound.
Specifies the amount sent to TOTAL FX
REVERB.
Finely adjusts the pitch in one-cent units.
Specifies the pan of the sound.
Specifies the behavior when a pad is
pressed.
NO-SUS: The volume immediately starts
decaying when you press the pad.
SUSTAIN: The volume starts decaying
when you release the pad.
Specifies the amount sent to TOTAL FX
DELAY.
B COMP (DRUM+COMP track only)
"COMP"
If you select and then press the [ENTER] button, the
compressor setting screen appears.
Six channels of compressors can be applied to one (and only one)
of the drum tracks.
When you create the track, specify whether it will have these
compressors.
If you use this track, the maximum number of Looper tracks is
reduced from six to four.
C SET
"SET"
When you select and press the [ENTER] button, the setting
screen for the part parameters and drum kit appears.
You can use the [C1]–[C4] knobs to edit the reverb, delay, pan, and
level for the total effect.
Parameter Value
LEVEL
0-127
(MIX LEVEL)
PAN L64–63R
>REVERB 0–127
(Reverb Send)
>DELAY 0–127
(Delay Send)
D MFX
Here you can edit the effect settings.
Parameter Value
SWITCH OFF, ON
TYPE
Refer to the MFX/
IFX parameters.
Effect parameters
For details, refer to "Parameter List"
E NAME
Press the [ENTER] button to access the drum kit (KIT) name editing
screen.
Operating the Unit
Cursor [<] [>] buttons
[C2] knob
[C3] knob [C4] knob,
[VALUE] knob
Press the [C2] knob
Press the [C3] knob
Explanation
Specifies the volume of the clip.
Specifies the pan of the sound.
Specifies the amount sent to TOTAL FX
REVERB.
Specifies the amount sent to TOTAL FX
DELAY.
Explanation
Turns the effect on/off.
Switches the effect type.
The parameters shown depend on the
selected effect type.
(p. 61).
Explanation
Selects the character to edit.
Switches between uppercase, lowercase,
numerals, and symbols.
Change the character.
Inserts a space.
Deletes a character.
45