Performance; Controller Values And Parameter Editing - Roland Groovebox MC-707 Reference Manual

List of Shortcut Keys

Performance

Operation
To audition a track in your headphones
To mute a track
To mute a drum part
(for each track)
To switch parts without sounding the drums
To start/stop each track
To forcibly return to the beginning of the pattern
during pattern playback
To silence sound that continues after stopping

Controller Values and Parameter Editing

Operation
To specify the parameter operated by the total
effect knobs
To view the value of a knob
To change the parameter value more greatly
To adjust the pad velocity curve
To specify tap tempo
To clear the Scatter pad parameters
To clear the Scatter Step parameter
To jump between effect type categories
To move to the same parameter for each band
(low, mid, high) of the TOTAL COMP
58
Operation
When in MUTE mode
(CUE)
Hold down the PAD MODE [MUTE] button and
Hold down the [SEL] button of the corresponding
track, and
Hold down the PAD MODE [NOTE] button and
Hold down the PAD MODE [CLIP] button and
During playback
While stopped
Operation
Hold down the [REVERB], [DELAY], or [MULTI]
button that you want to assign, and
Hold down the [SHIFT] button and
Hold down the PAD MODE [NOTE] button and
Hold down the [SHIFT] knob and
When in Scatter mode
Hold down the [CLEAR] button and
When the MFX EDIT screen is displayed
While the TOTAL COMP EDIT screen is displayed
Hold down the PAD MODE [MUTE] button and press a pad.
* The PAD MODE changes to CUE mode.
Press the [SEL] button of the corresponding track.
Press a pad.
Press the [SEL] button of the corresponding track.
Hold down the [SHIFT] button and press the [START/STOP] button.
Turn the [FX PRM] or [FX DEPTH] knob.
Move the knob.
Turn the [C1] [C2] [C3] [C4] knob or the [VALUE] knob.
Turn the [VALUE] knob.
Press the [ENTER] button three or more times.
Press a pad.
Press the [STEP] button.
Hold down the [SHIFT] button and turn the [C2] knob.
Hold down the [SHIFT] button and use the cursor [ ] [ ] buttons.